Genuine Soft Arkansas Benchstone
Use whenever an exceptionally fine edge is desired. Provides the final polishing and finishing to all your edges. The ultimate finishing stone for professionals and do-it-yourselfers alike.
The base comes with non-slip rubber frame.
Instructions
USING YOUR ARKANSAS BENCH STONE
Step 1 - Select the proper stone for your edge.
Soft- To maintain an already sharp edge
Hard- To hone/polish a finished edge
Step 2 - Set the stone on a stable, flat surface.
Step 3 - Lubricate the stone’s surface using Nathan’s Natural® Honing Oil.
Step 4 - Observe the bevel angle on the blade you intend to sharpen. Then, bring the edge to the stone matching your sharpening angle to the bevel angle.
Step 5 - Using light pressure, push the edge of the blade across the stone in one motion, much like trying to slice a thin layer off the top of the stone. Maintaining a consistent angle is essential for the best results.
Step 6 - Repeat process 3-4 times on one side of the blade, then switch to the other side and repeat.
Step 7 - Repeat this process until edge is sharp.
Step 8 - Make sure to clean your stones after each use. Store in a cool dry place.
Suggestions
1. Use a series of stones for the best results. Course -> Medium (Soft) -> Fine (Hard) -> Extra Fine
2. Start with 3-4 strokes per side. Repeat this process 3-4 times.
3. Then 2 strokes per side. Repeat this process 2-3 times.
4. Then 1 stroke per side. Repeat this process 1-2 times.
5. Then move on to a finer stone.
Be Smart, Be Safe and Stay an Edge Above the Rest!
